User Manual Q&AAnswer
Apr 04, 2025 - 01:53 AM
Loading nails into the Paslode F150S-PP Compact 1-Strip 1-2 Inch Positive Placement Metal Connector Nailer is a simple process. Here are the steps:
1. Disconnect the tool from the power source or remove the battery.
2. Open the magazine latch by pulling it towards the rear of the tool.
3. Slide the magazine cover down to open it.
4. Insert the nails into the magazine, making sure they are aligned properly and facing the correct direction. The nail heads should be facing towards the front of the tool.
5. Close the magazine cover by sliding it up until it locks into place.
6. Push the magazine latch forward to secure the magazine.
Please refer to the user manual for more detailed instructions and illustrations on loading nails into the Paslode F150S-PP Compact 1-Strip 1-2 Inch Positive Placement Metal Connector Nailer.
Add New Comment