User Manual Q&AAnswer
Apr 04, 2025 - 01:41 AM
To install the panel on your SAMSUNG RA-F36DB4DT Bespoke 4-Door French Door Refrigerator, please follow the steps below:
1. Ensure that you have all the necessary parts and tools for installation. The manual should provide a list of required parts and tools.
2. Start by removing the existing panel from the refrigerator. Refer to the manual for specific instructions on how to remove the panel.
3. Once the old panel is removed, align the new panel with the front of the refrigerator. Make sure it is centered and level.
4. Depending on the product type, the number of clips may differ. However, the installation guide should still apply. Refer to the manual for the specific number and location of clips for your refrigerator model.
5. Attach the clips to the panel and then secure them to the refrigerator. Follow the instructions in the manual for proper clip installation.
6. Once the panel is securely attached, double-check its alignment and make any necessary adjustments.
7. Finally, ensure that the panel is firmly in place and does not wobble or move.
Please note that the above instructions are a general guide. For detailed and specific instructions, it is recommended to refer to the SAMSUNG RA-F36DB4DT Bespoke 4-Door French Door Refrigerator Panel Instruction Manual that came with your product.
Add New Comment