Answer

Apr 04, 2025 - 01:39 AM
To install the bottom panel on your SAMSUNG 887276661117 Bespoke 3-Door French Door Refrigerator in Tuscan Steel, please follow the steps outlined in the installation guide provided with the product. The number of clips required for installation may vary depending on the product type, but the installation process remains the same.
Here is a general overview of the installation process:
1. Gather the necessary parts and tools: Before starting the installation, ensure that you have all the required parts and tools mentioned in the manual.
2. Prepare the refrigerator: Make sure the refrigerator is unplugged and empty before proceeding with the installation.
3. Remove the existing bottom panel (if applicable): If your refrigerator already has a bottom panel, carefully remove it by following the instructions in the manual.
4. Align the new bottom panel: Place the new bottom panel in the correct position, ensuring it aligns properly with the refrigerator.
5. Secure the panel with clips: Use the provided clips to secure the bottom panel in place. Refer to the manual for the specific instructions on how to attach the clips.
6. Test the installation: Once the panel is securely attached, gently push and pull on it to ensure it is properly installed and does not move or come loose.
7. Clean and reassemble: Clean any fingerprints or smudges from the panel using a soft cloth. Reassemble any parts or accessories that were removed during the installation process.
For detailed instructions and illustrations, please refer to the instruction manual that came with your SAMSUNG 887276661117 Bespoke 3-Door French Door Refrigerator Bottom Panel in Tuscan Steel.
Add New Comment