User Manual Q&AAnswer
Apr 04, 2025 - 01:36 AM
To install the Progress Lighting 8742 Alpha Trak Anywhere Power Feed, please follow these steps:
1. Before beginning installation, make sure to read the instructions carefully and turn off the electricity at the main circuit breaker panel.
2. Ensure that you are using this power feed with Progress Trak 1 Track only. Do not attempt to power it with any form of power supply cord from a wall receptacle or attach any convenience receptacle to the track.
3. The power feed should be supplied by a single branch circuit, such as a 120-volt circuit with a grounded neutral.
4. If you plan to use this track system with dimmers, timing controls, energy-saving devices, special security switching, or other devices, it is important to obtain professional advice to ensure safety compliance.
5. When installing or using the track system, always follow basic safety precautions. Read all instructions and turn off electricity at the main fuse box before making any changes to the track configuration. Additionally, disconnect electrical power at the fuse or circuit breaker before servicing or relamping.
6. Do not install the power feed in a damp or wet location, or less than five (5) feet above the floor. The track must be installed in a manner consistent with its intended use and in compliance with the National Electrical Code and other local electrical codes.
7. Proper grounding of the track is essential to avoid potential electrical shock or other hazards. Maintain polarity throughout the installation.
8. Use the power feed only for its intended purpose. Do not attempt to energize anything other than Progress Trak 1 Track from this power feed. Connecting power tools, extension cords, appliances, or other devices to the power feed can pose a fire and electric shock risk.
9. Ensure that no track lighting fixture assembly or accessory is installed closer than six (6) inches from any curtain or similar combustible material.
10. All servicing must be performed by qualified service personnel.
Please refer to the instruction manual for more detailed information and specific installation steps.
Add New Comment