User Manual Q&AAnswer
Apr 04, 2025 - 01:32 AM
To remove the transport bolts from the IKEA UDDARP Front Load Washer Dryer, follow these steps:
1. Ensure that the appliance is handled and installed by two or more persons to avoid the risk of injury. Use protective gloves to unpack and install the appliance to prevent cuts.
2. Before using the machine, it is imperative to remove the transport bolts. These bolts are designed to prevent any possible damage to the interior during transport.
3. Locate the transport bolts at the back of the appliance. They are usually marked with arrows or labeled as "transport bolts."
4. Use a suitable tool, such as a wrench or pliers, to loosen and remove the transport bolts. Turn them counterclockwise to loosen and remove them completely.
5. Once the transport bolts are removed, cover the openings with the four enclosed plastic caps provided. This will prevent any debris from entering the machine.
It is important to remove the transport bolts before using the appliance to ensure proper functioning and prevent damage during operation. Failure to remove the transport bolts may result in excessive vibration, noise, or damage to the appliance.
Add New Comment