User Manual Q&AAnswer
Apr 04, 2025 - 01:27 AM
To adjust the xxxx length for the fixture canopy depth, follow these steps:
1. Loosely thread the screws (AA) and the hex nuts (DD) onto the round mounting plate (CC) as shown in the diagram.
2. Attach this assembly to the outlet box using the mounting screws supplied with the outlet box. Make sure to tighten securely.
3. Lift up the fixture and pass the screws (AA) through the two mounting holes in the fixture canopy.
4. While holding the fixture with one hand, thread the screws (AA) in or out of the round mounting plate (CC) until approximately 3/16" of threads are showing. This should be enough to mount the fixture as instructed in step 5.
5. Take the fixture down and tighten the hex nuts (DD) up against the round mounting plate (CC). This will ensure that you have the correct length of threads for mounting the fixture.
Please refer to the assembly instructions in the manual for more detailed illustrations and instructions.
Add New Comment