User Manual Q&AAnswer
Apr 04, 2025 - 01:05 AM
To install the VIVAX CHO-60CHA100T X Range Cooker Hood, follow these steps:
1. Prepare for installation: Turn off and unplug the unit. Place the cooker hood at a distance of 65-75cm above the cooking plane.
2. Drill holes in the wall: Use the installation template provided to drill holes in the wall. Insert plastic wall plugs into these holes.
3. Fix the interior flue connection sheet: Tighten screws into the wall plugs at the designated points. Fix the interior flue connection sheet into the wall plugs using screws.
4. Remove the aluminum filter unit: Press the spring latch at the end of the filter to remove it.
5. Hang the hood: Engage the hood with the screws through the suspension holes. Tighten screws into the plastic wall plugs visible from the inner part of the product.
6. Connect to external air outlet (optional): If you have an outlet to the outside, connect the hood with an extraction duct. Pass the flexible aluminum pipe into the plastic flue and fix it. Insert the other end of the pipe into the flue hole on the wall.
7. Insert the interior flue into the exterior flue: Carefully insert the interior flue into the exterior flue and fix it with a xxxx on the interior flue connection sheet.
8. Fix the exterior flue: Fix the exterior flue on the flue mounting lugs located on the upper surface of the hood using screws.
9. Check the operation: Before connecting the pipe with the chimney, ensure that the hood operates properly by operating it. Make sure the flaps move upwards correctly and allow air exit.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment