How do I install the UTILITECH Recessed Downlight? (UTILITECH Recessed Downlight Instruction Manual)

Answer

manuals.plus

Apr 03, 2025 - 05:17 AM

Installation of the UTILITECH MQTL1183 3-IN-1 Recessed Downlight can be done using one of the three installation plans provided in the instruction manual. Here is a step-by-step guide for each plan:

Plan A:

1. Turn off the power to the circuit you will be working on by either removing the fuse or turning off the circuit breaker.

2. Remove the existing light fixture and disconnect the wires.

3. Connect the wires from the downlight to the existing wires using wire connectors.

4. Push the downlight into the ceiling opening until it is flush with the ceiling.

5. Secure the downlight to the ceiling using the provided clips.

6. Turn on the power and test the downlight.

Plan B:

1. Turn off the power to the circuit you will be working on by either removing the fuse or turning off the circuit breaker.

2. Remove the existing light fixture and disconnect the wires.

3. Install the provided mounting bracket onto the junction box in the ceiling.

4. Connect the wires from the downlight to the existing wires using wire connectors.

5. Attach the downlight to the mounting bracket and secure it in place.

6. Turn on the power and test the downlight.

Plan C:

1. Turn off the power to the circuit you will be working on by either removing the fuse or turning off the circuit breaker.

2. Remove the existing light fixture and disconnect the wires.

3. Install the provided mounting bracket onto the junction box in the ceiling.

4. Connect the wires from the downlight to the existing wires using wire connectors.

5. Attach the downlight to the mounting bracket and secure it in place.

6. Install the provided trim onto the downlight.

7. Turn on the power and test the downlight.

Please note that these are general installation instructions and it is important to follow the specific instructions provided in the manual for your particular model. If you have any further questions or need additional assistance, please refer to the instruction manual or contact the customer service department at 866-994-4148.