User Manual Q&AAnswer
Apr 03, 2025 - 05:12 AM
To operate the air jets and blower/heater in the Laurel Mountain PARKER 6 66 X 36 Inch Drop-In Acrylic Air Bath, please follow these steps:
1. Turn on the power: Ensure that the air bath is connected to a dedicated GFCI electrical circuit. The standard blower requires 10.5 Amps at 120V. Make sure the power is turned on before proceeding.
2. Adjust the air jet intensity: The air bath features 20 high-output lateral air jets. To adjust the intensity of the air jets, use the variable speed blower control. This control allows you to increase or decrease the strength of the air jets according to your preference.
3. Activate the blower/heater: The blower/heater in the air bath provides warmth and comfort during your bathing experience. It is a 10.5 Amp blower with a built-in heater. To activate the blower/heater, use the blower control switch. This switch will turn on both the blower and the heater simultaneously.
4. Select the desired mode: The air bath includes Wave and Pulse modes for a more relaxing and therapeutic experience. To activate these modes, use the mode selection switch. This switch allows you to switch between Wave mode, which creates a gentle wave-like motion, and Pulse mode, which provides a pulsating massage effect.
5. Enjoy Chromatherapy: The air bath also includes Chromatherapy, which uses colored lights to enhance relaxation and mood. The specific instructions for operating the Chromatherapy feature may be found in the Owner's Manual.
Please refer to the Laurel Mountain PARKER 6 66 X 36 Inch Drop-In Acrylic Air Bath Instruction Manual for more detailed information on operating and maintaining the product. The manual can be found on the Laurel Mountain website at www.laurelmountainbath.com under the "Resources" section, or you can contact Laurel Mountain customer service at 800-930-0050 for further assistance.
Add New Comment