User Manual Q&AAnswer
Apr 03, 2025 - 05:10 AM
To install the NICOR DGF4 4 Inch LED Recessed Adjustable Floating Gimbal, follow these steps:
1. Ensure that the power to the installation area is turned off.
2. Determine the location for the fixture and mark the ceiling accordingly.
3. Cut a hole in the ceiling according to the dimensions provided in the manual.
4. Connect the plenum-rated cable connector from the downlight module to the remote driver box.
5. Insert the fixture into the ceiling hole, making sure that the adjustable, spring-loaded retention tabs are securely in place.
6. If necessary, use the included extension power cables (10' or 20') to connect the fixture to the power source.
7. Turn on the power and test the fixture to ensure it is working properly.
Please refer to the NICOR DGF4 4 Inch LED Recessed Adjustable Floating Gimbal Instruction Manual for more detailed installation instructions and diagrams.
Add New Comment