User Manual Q&AAnswer
Apr 03, 2025 - 05:06 AM
To change the grinding wheels on the Einhell AXXIO 18/125 Cordless Angle Grinder, follow these steps:
1. Use the face spanner (supplied with the grinder) to change the grinding wheels. The face spanner is stored in the additional handle.
2. Pull the face spanner out of the additional handle when you need it. Note that for safety reasons, the angle grinder must not be operated with the face spanner inserted in it.
3. To change the grinding wheel, press the spindle lock and allow the grinding wheel to latch in place.
4. Open the flange nut with the face spanner.
5. Change the grinding wheel and tighten the flange nut with the face spanner.
Important: Only press the spindle lock when the motor and grinding spindle are at a standstill. Keep the spindle lock pressed while changing the wheel. For grinding or cutting wheels up to approximately 3 mm thick, xxxx on the flange nut with the flat side facing the grinding or cutting wheel.
Please refer to the manual for further details and illustrations on changing the grinding wheels.
Add New Comment