User Manual Q&AAnswer
Apr 03, 2025 - 05:01 AM
To set the temperature on the DRA ICE OKCE250S Electric Water Heater, you can use the thermostat xxxx located on the control panel. Here are the steps to follow:
1. Locate the thermostat xxxx on the control panel of the water heater.
2. Turn the thermostat xxxx to adjust the temperature setting. The desired temperature is indicated by aligning the symbol on the xxxx with the fixed point on the control panel.
3. Set the temperature to your desired level. We recommend setting the temperature to a maximum of 60°C for optimal operation, energy efficiency, and safety.
4. Once you have set the temperature, the water heater will heat the water to the desired temperature and maintain it at that level.
Please note that the thermostat xxxx should only be adjusted for temperature setting purposes and should not be tampered with for any other reason. If you experience any issues with the temperature or the operation of the water heater, it is recommended to seek professional assistance or refer to the troubleshooting section of the instruction manual.
Add New Comment