User Manual Q&AAnswer
Apr 03, 2025 - 04:43 AM
Before applying the , it is important to properly prepare the surface. Here are the steps to follow:
1. Tape off the desired area for the non-slip coating treatment.
2. Sand the surface with 220- or 320-grit wet sandpaper until it becomes dull. This step ensures proper adhesion of the coating.
3. Mix the base and hardener in a ratio of 4 parts base to 1 part hardener. Make sure to shake the base well before mixing. The working time for the mixture is approximately one hour, depending on the temperature.
4. If thinning is necessary, you can reduce the ratio to 8:1 by using the temperature-rated reducer.
5. Apply a moderate coat or multiple coats with an enamel-type paint roller until you achieve the desired coverage consistency and texture.
6. After applying the coating, remove the tape and allow the surface to cure for 12 to 24 hours.
Please refer to the provided installation guide for more detailed instructions and safety precautions.
Add New Comment