User Manual Q&AAnswer
Apr 03, 2025 - 04:34 AM
To install the lowes A04915 3-Light 13-Inch Wood Brown and Brushed Silver LED Flush Mount Light, please follow the steps below:
1. Before starting the installation, make sure to turn off the power by going to the main fuse or circuit breaker box in your home and placing the main power switch and wall switch in the "OFF" position.
2. Ensure that the mounting surface is clean, dry, flat, strong enough, and 1/4" larger than the canopy on all sides. Correct any gaps between the mounting surface and canopy exceeding 3/16" as required.
3. Check if the ceiling or wall can support the weight of the lamp before installation.
4. Make sure the voltage you are using is 120V, and the maximum wattage for each bulb is Type B 40W.
5. Keep the lamp away from acidic and alkaline substances to avoid damaging the surface.
6. When replacing bulbs, turn off or unplug the lamp and wait until it is cool, as bulbs can get hot quickly.
7. It is recommended to have the installation done by a licensed electrician for safety purposes.
For a more detailed step-by-step guide, please refer to the user manual provided with the lowes A04915 3-Light 13-Inch Wood Brown and Brushed Silver LED Flush Mount Light.
Add New Comment