User Manual Q&AAnswer
Apr 03, 2025 - 04:26 AM
To connect the Teufel US 2106-1 SW Active Subwoofer to your AV receiver or preamplifier, follow these steps:
1. Make sure the subwoofer and the device you want to connect it to are both turned off.
2. Locate the "Line In" jack (labeled as "2") on the back of the subwoofer.
3. Use a mono RCA cable to connect the "Line Out" or "Subwoofer Out" jack on your AV receiver or preamplifier to the "Line In" jack on the subwoofer.
4. Ensure the connection is secure on both ends.
5. Turn on the subwoofer and the device you connected it to.
Note: If your AV receiver or preamplifier does not have a dedicated subwoofer output, you can connect an available speaker output to the "Line In" jack on the subwoofer using a voltage reducer and an RCA connector cable. Please refer to the manual for more information on this setup.
For more detailed instructions and information, please refer to the "Connecting" section of the Teufel US 2106-1 SW Active Subwoofer Instruction Manual.
Add New Comment