User Manual Q&AAnswer
Apr 03, 2025 - 03:39 AM
To connect the Arize HORT166 Integral Intracanopy LED Lighting System to the AC power supply, follow these steps:
1. Turn off the power before starting the installation.
2. Rotate and remove the connector cap from the leader cable.
3. Align the keying features of the male connector on the first Integral module with the female connector on the leader cable.
4. Push the connectors together until you hear a click to ensure they are securely connected.
5. It is recommended to secure the AC input leader cable.
6. Put the connector cap on the female connector of the last Integral module in the chain. Rotate the cap to ensure it is installed properly and complies with IP66 standards.
Note: To disassemble the connectors, rotate the blue ring and pull to separate them.
Remember to relieve the stress from the cable connections by introducing a loop and using cable ties. The lowest point of the power cable should be just below the lowest point of the male connector.
If you need further assistance or more detailed instructions, please refer to the Arize HORT166 Integral Intracanopy LED Lighting System Instruction Manual.
Add New Comment