User Manual Q&AAnswer
Apr 03, 2025 - 03:29 AM
According to the user manual, the DIEHL ALTAIR V4 Concentric Volumetric Meter is specifically designed for installation on a coaxial base in a concentric manifold. Here is a step-by-step guide on how to install the meter:
1. Ensure that the water supply is turned off before starting the installation process.
2. Remove any dirt or debris from the coaxial base and the concentric manifold to ensure a clean installation surface.
3. Place the meter on the coaxial base, aligning the thread connections.
4. Use a special wrench, which can be obtained from Diehl Metering, to tighten the meter onto the coaxial base. Ensure that the meter is securely fastened to prevent any leaks.
5. Once the meter is installed, turn on the water supply and check for any leaks. If there are any leaks, tighten the meter further or seek professional assistance.
6. After installation, it is recommended to check the meter's functionality by monitoring the water flow and reading the meter readings.
Please note that the installation process may vary depending on the specific setup and requirements of your water system. It is always advisable to consult the user manual or seek professional assistance for specific installation instructions.
Add New Comment