User Manual Q&AAnswer
Apr 03, 2025 - 03:02 AM
To connect the ARRIS XB7 Commscope to your home network, follow these steps:
1. Ensure that your internet service is active and working properly.
2. Connect one end of the coaxial cable to the cable outlet on your wall.
3. Connect the other end of the coaxial cable to the "Cable In" port on the back of the ARRIS XB7 Commscope.
4. Connect one end of an Ethernet cable to the Ethernet port on the back of the ARRIS XB7 Commscope.
5. Connect the other end of the Ethernet cable to the Ethernet port on your computer or to the WAN port of your router (if you have one).
6. Plug the power cord into the power port on the back of the ARRIS XB7 Commscope.
7. Plug the other end of the power cord into a power outlet.
8. Wait for the ARRIS XB7 Commscope to power on and establish a connection with your internet service provider.
9. Once the connection is established, you should be able to access the internet on your connected devices.
Note: If you are using a router, you may need to configure it to work with the ARRIS XB7 Commscope. Consult your router's user manual for instructions on how to do this.
Add New Comment