How to connect and control devices using KRAMER Compact 16-Port Master Room Controller with PoE? (Kramer SL-240C Compact 16-Port Master Room Controller PoE User Manual)

Answer

manuals.plus

Apr 03, 2025 - 03:00 AM

To connect and control devices using the KRAMER SL-240C Compact 16-Port Master Room Controller with PoE, follow these steps:

1. Connect the SL-240C to your network: Use an Ethernet cable to connect the SL-240C's Ethernet port to your network switch or router.

2. Power the SL-240C: The SL-240C can be powered through Power over Ethernet (PoE) or an optional 5V DC power supply. If using PoE, ensure that your network switch or router supports PoE. If not, connect the optional 5V DC power supply to the SL-240C.

3. Connect devices to the SL-240C: The SL-240C has various control ports for connecting devices. Here's how to connect different types of devices:

- RS-232 Control: Use 3-pin terminal blocks to connect devices that support bi-directional serial control protocols. Connect the TX, RX, and GND pins accordingly.

- IR Control: Use the IR emitter and receiver control ports to connect devices that support IR control protocols. Connect the IR emitters to the IR out ports and position them in front of the devices to be controlled. Use the built-in IR sensor to learn commands from IR remotes.

- GPI/O Control: Use the GPI/O control ports to connect devices that can be controlled via general-purpose I/O ports. Configure the ports as digital input, digital output, or analog input as required. Connect the devices to the appropriate pins on the 2-pin terminal blocks.

- Relay Control: Use the relay control ports to connect devices that can be controlled via relay contact closure. Connect the devices to the relay terminals on the 2-pin terminal blocks.

4. Configure and program the SL-240C: Use the Kramer Control software or API to configure and program the SL-240C according to your specific requirements. The software provides a scalable and flexible programming platform.

5. Monitor and control devices: Once the SL-240C is configured and programmed, you can use the software or API to monitor and control connected devices. The LED indicators on the SL-240C will provide information about the port and system status.

Please refer to the KRAMER SL-240C Compact 16-Port Master Room Controller with PoE User Manual for more detailed instructions and troubleshooting information.