Answer

Apr 03, 2025 - 02:45 AM
To provision the WATTECO Press’O 50-70-017 LoRa WAN Class A Analogue Adapter on your LoRaWAN network, you need to follow these steps:
1. Obtain the necessary keys: The keys required for provisioning the device are available on the secure platform provided by your LoRaWAN network. Make sure you have access to these keys before proceeding.
2. Connect the device: Ensure that the device is properly connected to your LoRaWAN network. This typically involves establishing a physical connection between the device and the network server.
3. Access the device settings: Use the appropriate software or interface to access the device settings. This may involve using a web-based interface or a dedicated software provided by WATTECO.
4. Enter the keys: In the device settings, locate the section for entering the LoRaWAN network keys. Enter the keys provided by your network into the respective fields. These keys include the Device EUI, Application EUI, and Application Key.
5. Save and apply the settings: Once you have entered the keys, save the settings and apply them to the device. This will initiate the provisioning process and establish the connection between the device and your LoRaWAN network.
6. Verify the provisioning: After applying the settings, verify that the device has successfully provisioned on your LoRaWAN network. You can check the network server or use any provided tools to confirm the device's connectivity and functionality.
For more detailed instructions and troubleshooting, refer to the user guide provided by WATTECO or visit their support website at https://support.watteco.com/.
Add New Comment