How do I provision the WATTECO Inclin’O Sensor on my LoRaWAN network? (WATTECO Inclin’O Sensor User Guide)

Answer

manuals.plus

Apr 03, 2025 - 02:44 AM

To provision the WATTECO 50-70-201 Inclin’O Sensor on your LoRaWAN network, you will need to follow these steps:

1. Obtain the necessary keys: The keys required for provisioning the sensor on your LoRaWAN network are available on the secure platform provided by WATTECO. Make sure you have access to these keys before proceeding.

2. Access the secure platform: Visit the secure platform provided by WATTECO and log in using your credentials.

3. Locate the device provisioning section: Within the secure platform, navigate to the device provisioning section. This is where you will find the necessary tools and options to provision your sensor.

4. Enter the device information: Provide the required information about the WATTECO 50-70-201 Inclin’O Sensor, such as its unique identifier or serial number. This information will help the platform identify and connect to your specific device.

5. Enter the network keys: Input the LoRaWAN network keys provided by WATTECO into the appropriate fields on the secure platform. These keys include the Device EUI, Application EUI, and Application Key.

6. Save and confirm: After entering the necessary information and network keys, save the settings and confirm the provisioning process. The secure platform will then initiate the provisioning process and establish a connection between your sensor and the LoRaWAN network.

Please note that the exact steps and terminology may vary depending on the specific secure platform and network provider you are using. It is recommended to refer to the user guide or documentation provided by WATTECO for more detailed instructions on provisioning the 50-70-201 Inclin’O Sensor on your LoRaWAN network.