User Manual Q&AAnswer
Apr 03, 2025 - 02:39 AM
To install the EUROfase 37038 LED Pendant, follow these steps:
1. Before starting the installation, make sure to disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box.
2. Ensure that all electrical connections comply with local and National Electrical Code or Canadian Electrical Code standards.
3. Use CSA or UL listed wire connectors suitable for the gauge, type, and number of conductors.
4. If your junction box has a grounding wire (green or bare copper), connect it to the bare copper wire from the fixture. If the junction box does not have a ground wire, attach the bare copper fixture wire to the green ground xxxx on the crossbar.
5. Follow the assembly instructions provided in the numerical progression.
6. Estimated assembly time is approximately 20 minutes.
7. Tools required for assembly (not included): Flathead screwdriver, Philips screwdriver, pliers, electrical tape, and wire cutters.
8. Additional helpful tools (not included): Wire strippers and a ladder.
Please refer to the EUROfase 37038 LED Pendant Instruction Manual for more detailed instructions and illustrations. It is important to note that for the installation of this lighting fixture, it is recommended to use a qualified electrician to ensure proper installation and safety.
Add New Comment