User Manual Q&AAnswer
Apr 03, 2025 - 02:23 AM
To charge a USB device using the VOLTCRAFT VC100WC-3 Car USB-CTM Charging Adapter, follow these steps:
1. Connect the switched-off USB device to the product. You can use either the integrated USB-CTM cable or a suitable cable for the USB-CTM port/USB-A port.
2. Plug the adapter plug into the cigarette lighter socket in your vehicle. The status LED on the product will light up, indicating that the product is ready for use.
3. The USB device will now start charging. If you wish to use the USB device, you may turn it on.
Important: You can use the product when the engine is on or off. However, do not start the engine when the product is connected, as the power supply to the cigarette lighter socket is interrupted at start-up on some vehicle models. If the engine is switched off, charging over a longer period of time may discharge the vehicle battery.
To disconnect a USB device:
1. Switch off the USB device.
2. Disconnect the product from the cigarette lighter socket.
3. Disconnect the USB cable from the product.
Please refer to the VOLTCRAFT VC100WC-3 Car USB-CTM Charging Adapter Instruction Manual for more information and safety precautions.
Add New Comment