User Manual Q&AAnswer
Apr 03, 2025 - 02:20 AM
To install the battery in the RC4WD 1/14 6x6 Sledge Hammer Heavy Haul Off-Road Hydraulic RTR Dump Truck, follow these steps:
1. Before connecting the battery, measure its voltage to ensure it is not lower than 11.1V.
2. The battery compartment size is 142*45*40mm. Make sure the battery you purchase fits within this range.
3. Disconnect the battery from the speed control when not in use.
4. Connect the battery to the main car power supply.
5. Turn on the remote control first, ensuring the switch or xxxx is in the default position.
6. Wait for the signal sound confirmation (about 5 seconds) before operating the truck. Operating the truck before the signal sound confirmation may cause the ESC to enter the settings mode and result in improper functioning.
Please refer to the user guide for more detailed instructions and safety precautions regarding battery usage and charging.
Add New Comment