User Manual Q&AAnswer
Apr 03, 2025 - 01:50 AM
To set the daily schedule on the Tecnoswitch EN 61000-6-1 Daily Mechanical Timer Switch, please follow the instructions below:
1. Make sure the switch is in the "OFF" position.
2. Locate the 48 setting pins on the timer switch. These pins are used to set the ON and OFF times for each day.
3. To set the ON time, push the desired pins inward. Each pin represents a 30-minute interval. For example, if you want the device to turn ON at 8:00 AM, push the pin corresponding to 8:00 AM inward.
4. To set the OFF time, pull out the pins for the desired intervals. For example, if you want the device to turn OFF at 6:00 PM, pull out the pin corresponding to 6:00 PM.
5. Repeat steps 3 and 4 for each day of the week, setting the desired ON and OFF times.
6. Once you have set the schedule for each day, switch the timer to the "AUTO" mode.
7. The timer will now follow the programmed schedule, turning the connected load ON and OFF according to the set times.
Please note that the Tecnoswitch EN 61000-6-1 Daily Mechanical Timer Switch has a minimum setting time interval of 30 minutes and an accuracy of 1.5 seconds per day. It also has a backup battery with an autonomy of 100 hours, ensuring that the programmed schedule is maintained even during power outages.
For further assistance or more detailed instructions, please refer to the user manual provided with the product.
Add New Comment