User Manual Q&AAnswer
Apr 03, 2025 - 01:48 AM
To adjust the stirring speed on the PCE Instruments PCE-MSR 50 Magnetic Stirrer, follow these steps:
1. Place the magnetic stirrer on a smooth and solid surface.
2. Connect the magnetic stirrer to the power supply.
3. Place the beaker with the medium in the middle of the platform.
4. To adjust the stirring speed, slowly turn the xxxx to the desired position.
5. If you turn the xxxx too quickly, the liquid can spill. In this case, turn the xxxx back to the minimum position and then slowly increase the stirring speed again.
It is important to note that mixed samples of small volume should not be stirred at maximum speed to avoid the beaker from falling off the platform.
Add New Comment