User Manual Q&AAnswer
Apr 03, 2025 - 01:31 AM
To charge the Skydio X2D drone, follow these steps:
1. Slide one or both batteries down the rails onto the Dual Charger, ensuring that the magnets engage properly.
2. Connect the provided USB-C cable and the 65 W power adapter to the Dual Charger.
3. Plug the power adapter into a 100-240 V power source. The flashing lights indicate that the charging process has started, and no light indicates that the charge is complete.
To charge the Skydio Enterprise Controller, connect it to the USB-C charging cable and the 65 W adapter. The lights on the front of the controller will flash blue when it is charging. When the charging is complete, the lights will be solid blue for 1 minute and then turn off.
Please note that extreme hot or cold temperatures should be avoided during charging, and the battery storage instructions provided in the X2D Operator Manual should be followed.
Add New Comment