Answer

Apr 03, 2025 - 01:29 AM
To connect the Trust Tytan 1.2 Speaker Set to your device, please follow these steps:
1. Make sure your device (such as a computer, smartphone, or tablet) is turned on and has an available audio output port.
2. Locate the audio cable that came with the speaker set. It should have a 3.5mm jack on both ends.
3. Connect one end of the audio cable to the audio output port of your device. This is usually labeled as "Audio Out" or "Headphone Out."
4. Connect the other end of the audio cable to the "Audio In" port on the back of the main speaker unit. The port should be labeled accordingly.
5. Once the audio cable is securely connected, plug the power adapter into a power outlet and connect it to the main speaker unit.
6. Turn on the speaker set by pressing the power button located on the main speaker unit. The power indicator should light up.
7. Adjust the volume using the volume control xxxx on the main speaker unit or through your device's audio settings.
8. You should now be able to hear audio through the Trust Tytan 1.2 Speaker Set.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the product or visit the Trust website at www.trust.com/19019/faq.
Note: If your device does not have a 3.5mm audio output port, you may need to use an adapter or alternative connection method, such as Bluetooth, depending on the capabilities of your device and the speaker set.
Add New Comment