How do I pair Vaddio RF Remote Commander with my camera? (Vaddio RF Remote Commander User Guide)

Answer

manuals.plus

Apr 03, 2025 - 01:26 AM


To pair the Vaddio RF Remote Commander with your camera, follow these steps:

1. Ensure that the camera is turned on and its status light is white.
2. There are two methods to pair the remote: using the camera's IP button or the camera's administrative web interface.

   Pairing using the camera's IP button:
   - Press and hold the camera's IP button until the status light blinks cyan.
   - While the camera's status light is blinking cyan, press the pairing button on the remote.
   - The camera's status light will change to steady white when the remote is successfully paired. You may need to press the remote's pairing button more than once.
   - If the status light changes color and continues blinking, the pairing was not successful. In this case, reboot the camera and repeat the process from step 1. If the problem persists, contact Vaddio Technical Support.

   Pairing using the camera's administrative web interface:
   1. Access the camera's web interface and navigate to the Pairing page.
   2. Select the "Pair Remote" option.
   3. When the camera's status light blinks cyan, press and hold the pairing button on the remote until the status light changes to steady white.

Once the remote is paired with the camera, you can use it to control basic camera and conference functionalities such as pan, tilt, zoom, presets, volume control, and muting, as applicable.