Answer

Apr 03, 2025 - 01:16 AM
To install the Hanover HSIMONEGLD-1WS Simone Wall Sconce, you have the option of plug-in or hardwire installation. Here is a step-by-step guide for both installation methods:
Plug-in Installation:
1. Locate a suitable electrical outlet near the desired installation area.
2. Attach the mounting plate to the wall using the provided hardware. Make sure it is securely fastened.
3. Plug the clear 8-ft. long power cord into the electrical outlet.
4. Attach the wall sconce to the mounting plate by aligning the holes on the back of the sconce with the screws on the mounting plate. Securely tighten the screws to hold the sconce in place.
5. Use the online on/off rocker switch on the power cord to control the light.
Hardwire Installation:
1. Turn off the power supply to the designated electrical circuit at the circuit breaker.
2. Remove the existing wall sconce or fixture, if applicable.
3. Connect the wires from the electrical box to the corresponding wires on the wall sconce. Use wire connectors to secure the connections.
4. Attach the mounting plate to the wall using the provided hardware. Make sure it is securely fastened.
5. Mount the wall sconce to the mounting plate by aligning the holes on the back of the sconce with the screws on the mounting plate. Securely tighten the screws to hold the sconce in place.
6. Turn on the power supply at the circuit breaker.
7. The wall sconce can now be controlled by a wall switch.
Please note that for hardwire installation, it is recommended to consult a licensed electrical contractor to ensure proper installation and compliance with local electrical codes.
For any further assistance or clarification, you can refer to the Hanover HSIMONEGLD-1WS Simone Wall Sconce instruction manual or contact Hanover's customer service, as mentioned in the product description.
Add New Comment