User Manual Q&AAnswer
Apr 03, 2025 - 12:59 AM
To connect the muvit iO MIOLST005 LED Strip to your TV, follow these steps:
1. Clean the area where you want to install the light strip and keep it clean.
2. Stick the LED strip light to the back or edge of your TV or monitor, using the connector to hold the strip light to the edge at the corners. Be careful when attaching the LED strip light.
3. Firmly and correctly connect the strip light connector on the controller to the strip light with the polarity facing in the same + and - direction.
4. Remove the adhesive tape from the back of the controller and place the controller in position. Connect the color sensor plug to the connector on the controller.
5. Install and vertically attach the color sensor to the left or right side of the display with the head of the color sensor and the edge of the device vertically aligned.
6. After installation is complete, connect the device to a power source. If the strip is reset or blocked, use a 2A power adapter to power the LED strip.
For more detailed instructions and illustrations, please refer to the "Installation on TV" section in the muvit iO MIOLST005 Tira LED USB Wifi TV RGB 3m Con Sensor Instruction Manual.
Add New Comment