User Manual Q&AAnswer
Mar 29, 2025 - 12:28 PM
To install the ATOMSTACK M100 130W Quad-Laser Module with Air Assist System, please follow the steps below:
1. If your laser is in the form of the picture provided in the manual, remove the original laser fixing plate and laser.
2. Find the combination slide in the accessories and fix it in place.
3. Install the laser onto the combination slide.
4. Install the air pipe for the air assist system.
If your laser is in a different form, please refer to the manual for the specific installation steps.
For more detailed instructions and illustrations, please refer to the "Installation Steps" section in the ATOMSTACK M100 130W Quad-Laser Module with Air Assist System Instruction Manual.
Note: It is important to ensure that the laser is installed securely and that all safety precautions are followed during the installation process.
Add New Comment