Answer

Mar 29, 2025 - 11:59 AM
To install the PHILIPS SEG101 PIR Wireless WH EcoSet Basic Control System, follow these steps:
1. Remove the installing cover.
2. Fix the installing cover to the desired position using screws.
3. Release the xxxx and remove the battery back cover.
4. Install two AA batteries.
5. Install the rear cover of the battery and secure the screws.
6. Mount the sensor housing on the installing cover. Ensure that the fixed position can bear a weight of at least 680g.
7. The product has a protection grade of IP20/IP65, indicating its suitability for indoor or outdoor use.
Note: If using multiple lamps in one area, maintain a minimum distance of 1.5m between two sensors to prevent false triggering.
For more detailed instructions and illustrations, please refer to the PHILIPS SEG101 PIR Wireless WH EcoSet Basic Control System Instruction Manual.
Add New Comment