Answer

Mar 29, 2025 - 11:55 AM
To install and wire the PHILIPS Digital Ignitors for Maximum Reliability, please follow the steps below:
1. Ensure that the power supply is turned off before starting the installation process.
2. Identify the appropriate location for installing the ignitor. It is commonly used in outdoor lighting applications such as roads and tunnels.
3. Connect the ignitor to the ballast and the HID lamp circuit. The ignitor is equipped with xxxx terminal blocks as standard, which makes the wiring process easier.
4. If you are using a series ballast, make sure to connect the ignitor in a series circuit. The series ignitor will only work in series circuits.
5. If you are using a semi-parallel ballast, the ignitor can still be used. Connect the ignitor according to the manufacturer's instructions for the specific ballast model.
6. Double-check all the connections to ensure they are secure and properly tightened.
7. Once the wiring is complete, turn on the power supply and test the ignitor to ensure it is functioning correctly.
Please note that this answer is based on the information provided in the PHILIPS Digital Ignitors for Maximum Reliability Owner's Manual. For specific installation instructions and further details, it is recommended to refer to the manual or contact the manufacturer directly.
Add New Comment