User Manual Q&AAnswer
Mar 29, 2025 - 11:50 AM
To set the time on your TW STEEL Z60 Smartwatch, follow these steps:
1. Pull out the crown to position III (the watch stops).
2. Turn the crown until you reach the correct time.
3. Push the crown back into position I.
Please note that if you want to set the time to the exact second, the crown must be pulled out when the second hand is in the "60" position. Once the hour and minute hands have been set, the crown must be pushed back into position I at the exact second.
To set the date in quick mode, follow these steps:
1. Pull out the crown to position II (the watch continues to run).
2. Turn the crown anticlockwise until the correct date appears.
3. Push the crown back into position I.
During the date changing phase between approximately 09:45 PM and 12 PM, the date must be set to the date of the following day.
If you want to set the date, day of the week (Z60), and time, follow these steps:
1. Pull out the crown to position III (the watch stops).
2. Turn the crown anticlockwise until yesterday's day of the week appears.
3. Push the crown to position II.
4. Turn the crown until yesterday's date appears.
5. Pull out the crown to position III (the watch stops).
6. Turn the crown anticlockwise until the correct date and day of the week appear.
7. Continue to turn the crown anticlockwise until the correct time appears.
8. Push the crown back into position I.
Please note that to set your watch to the exact second, refer to the "setting the time" chapter in the user guide. Also, observe the AM/PM clock rhythm.
For more detailed instructions and illustrations, please refer to the TW STEEL Z60 Smartwatch User Guide.
Add New Comment