How often should I replace the filters in the XPOWER DC Brushless Motor Air Purification System? (XPOWER DC Brushless Motor User Manual)

Answer

manuals.plus

Mar 29, 2025 - 11:33 AM


According to the user manual, the filter maintenance instructions recommend the following replacement intervals for the filters:

1. Washable Nylon Filters: Remove any loose particles using a vacuum or clean cloth, then wash with water. Allow it to air dry. This filter can be reused multiple times.

2. Pre-Filters: Remove any loose particles using a vacuum or clean cloth, then wash with water. Allow it to air dry. This filter can be reused multiple times.

3. Pleated Media Filter: This filter is not washable. Use a vacuum to remove loose debris. It does not specify a specific replacement interval for this filter.

4. Activated Carbon Filter (Optional for AP-2500D): This filter is not washable. Use a vacuum to remove loose debris. Lay it flat on a clean and dry surface under the sun for 3 hours to help remove any absorbed substances. It does not specify a specific replacement interval for this filter.

5. HEPA Filter: This filter is not washable or reusable. Cleaning the HEPA filter can be hazardous to human health and damage the environment. When it's time to replace the HEPA filter, remove it and place it in a disposable bag for safety when discarding it. The pressure gauge on the unit will monitor the filter's status, and the pressure drops when it's time to change the filters.

It is recommended to follow the maintenance instructions in the user manual and replace the filters as needed based on their condition and the pressure gauge readings.