Answer

Mar 29, 2025 - 11:25 AM
To configure the LoRaWAN settings for the AM300 series indoor ambiance monitoring sensor, follow these steps:
1. Open the Milesight ToolBox App or ToolBox software on your smartphone or computer.
2. Go to the "LoRaWAN Settings" section in the ToolBox App or software.
3. In the "Basic" settings, configure the following parameters:
- Device EUI: Unique ID of the device (can be found on the label).
- App EUI: Default App EUI is 24E124C0002A0001.
- Application Port: The port used for sending and receiving data (default is 85).
- Join Type: Choose between OTAA and ABP mode.
- LoRaWAN Version: Select the appropriate LoRaWAN version.
- Application Key: Appkey for OTAA mode (default is 5572404C696E6B4C6F52613230313823).
- Device Address: DevAddr for ABP mode (default is the 5th to 12th digits of the SN).
- Network Session Key: Nwkskey for ABP mode (default is 5572404C696E6B4C6F52613230313823).
- Application Session Key: Appskey for ABP mode (default is 5572404C696E6B4C6F52613230313823).
- Spread Factor: Set the spread factor for data transmission.
- Confirmed Mode: Enable or disable confirmed data transmission.
- Rejoin Mode: Choose the rejoin mode based on the reporting interval.
- ADR Mode: Allow network server to adjust the data rate of the device.
- Tx Power: Set the transmit power of the device.
4. Save the settings and ensure that the channels selected in the "Channel" section match the LoRaWAN gateway.
5. Sync the time on the device by clicking the "Sync" button in the ToolBox App or software.
6. Apply the LoRaWAN settings to the AM300 series sensor.
Please refer to the user guide for more detailed instructions and illustrations on configuring the LoRaWAN settings for the AM300 series indoor ambiance monitoring sensor.
Add New Comment