Answer

Mar 29, 2025 - 11:22 AM
To configure the AM100 series sensor using NFC, follow these steps:
1. Download and install the "Milesight ToolBox" app from Google Play or the Apple App Store.
2. Enable NFC on your smartphone.
3. Launch the Milesight ToolBox app.
4. Attach your smartphone with the NFC area to the device.
5. The app will recognize the device and display basic information and settings.
6. Change the device password for security purposes (default password is 123456).
7. Use the app to turn on/off, read, and configure the device.
Note: Ensure that the location of your smartphone's NFC area is aligned with the device's NFC area. If the smartphone fails to read or write configurations via NFC, try moving the phone away and then back again. You can also use a dedicated NFC reader, which can be purchased from Milesight IoT, to configure the device.
For more detailed instructions and information, refer to the "NFC Configuration" section in the user guide provided with the AM100 series sensor.
Add New Comment