Answer

Mar 29, 2025 - 10:35 AM
To set the desired temperature on the Kogan KASMKTOCHBA Double Walled Smart Kettle, follow these steps:
1. Press the back end of the lid release button to open the lid of the kettle.
2. Fill the kettle with water until it reaches at least the MIN water level line (0.5L).
3. Place the kettle on the power base and close the lid.
4. Plug the power base cord into a power socket and switch it on.
5. The unit will emit an audible sound upon powering on and the display screen will flash, then display the current water temperature in Celsius (°C).
This kettle features two heating modes: 'Keep warm' and 'Boil'.
To set the desired temperature in the 'Keep warm' mode:
1. Repeatedly press the TEMP button ('') to cycle through the available temperatures (40-50-60-70-80-90°C).
2. The button will light up and remain lit until the water is heated to the desired temperature.
3. Press the KEEP WARM button (''). The kettle will heat the water to the desired temperature, and the button will remain lit while the kettle is in this mode.
4. The kettle will emit a sound prompt when heating is finished, and it will maintain the water temperature.
5. When using this mode in the future, the kettle will default to the previously desired temperature.
To set the kettle to the 'Boil' mode:
1. Press the BOIL button. The button will light up and remain lit until the water is boiled.
2. The kettle will emit a sound prompt when boiling has finished, and it will enter standby mode. The water is now ready for use.
3. The display will show the temperature of the water and change in real-time as it heats to boiling point.
Please refer to the user guide for more detailed instructions and safety precautions.
Add New Comment