Answer

Mar 29, 2025 - 04:57 AM
To program and control the temperature actuator RFSTI-11B-SL using the RF Touch control unit (RFTC-50/G, eLAN-RF), follow these steps:
1. Locate the address listed on the front of the actuator. This address will be used for programming and controlling the temperature actuator.
2. Ensure that the RF Touch control unit is within range of the temperature actuator (up to 200m in open air).
3. Use the RF Touch control unit to access the programming menu.
4. Enter the programming mode and select the option to add a new device.
5. Enter the address of the temperature actuator as listed on the front of the actuator.
6. Once the RF Touch control unit recognizes the temperature actuator, you can proceed with programming and controlling its functions.
7. Use the RF Touch control unit to set the desired function of heating/cooling, hysteresis, and offset for the temperature actuator.
8. Save the settings and exit the programming mode.
Please note that these instructions are a general guideline. For detailed programming instructions specific to your RF Touch control unit, refer to the instruction manual provided with the RF Touch control unit.
Add New Comment