User Manual Q&AAnswer
Mar 27, 2025 - 03:25 AM
To operate the ivigo ELA 300 Electric Foot Warmer, follow these steps:
1. Plug the device into a grounded socket. The stand-by light on the dashboard will turn on, indicating that the device is receiving electricity.
2. To turn on the device, press the POWER button on the remote control or the on/off button on the device. The device will start operating at the 1st level, and the 1st level light will light up on the dashboard.
3. To adjust the temperature, use the (+) button to increase the temperature or the (-) button to decrease the temperature on the remote control.
4. If you want to operate the device at maximum power, you can use the Continuous Operating at Maximum Power (Turbo Timer) button on the remote control or move to the 2nd level. The presence-detecting system will be disabled for 8 hours after activating Turbo Timer.
5. The device will automatically turn off if no pressure is applied to it for one hour. You can also turn off the device by pressing the POWER button on the remote control.
6. Clean the device with a soft and moist cloth. Do not use solvents, scratching liquids, or powder detergents for cleaning.
7. If you experience any malfunctions, consult the Distributor's Consumer Advisory Hotline.
Please refer to the ivigo ELA 300 Electric Foot Warmer User Manual for more detailed instructions and safety precautions.
Add New Comment