Answer

Mar 26, 2025 - 12:45 PM
To replace the miter scale on the SKIL SPT88-01 Worm Drive Dual Bevel Sliding Miter, follow these steps:
1. Remove the old miter scale by unscrewing the screws that hold it in place. Refer to the part number 3706973026 in the spare parts list for the miter scale.
2. Once the old miter scale is removed, align the new miter scale in the correct position.
3. Secure the new miter scale by tightening the screws back into place. Use the screws listed under part number 5610361052 ( xxxx M6*13) in the spare parts list.
4. Ensure that the miter scale is properly aligned and securely attached before using the miter saw.
For further assistance or clarification, please refer to the instruction manual provided with the SKIL SPT88-01 Worm Drive Dual Bevel Sliding Miter or contact SKIL customer support.
Add New Comment