User Manual Q&AAnswer
Mar 26, 2025 - 12:13 PM
1. Connect the GTA series amplifier to your PC using a Fast Ethernet connection.
2. Download and install ArmoníaPlus, the default configuring interface, from the Armonía website. You can find the software for free at https://armonia.powersoft.it/.
3. Once ArmoníaPlus is installed, open the software and ensure that your GTA series amplifier is connected and recognized.
4. In ArmoníaPlus, navigate to the preset library section. This is where you can access and load the presets for your loudspeaker model.
5. Locate the preset that corresponds to your loudspeaker model. The presets are categorized based on the number of ways (number of channels required) and the type of ways (LF, HF, etc.).
6. Review the preset details, including the application (Full Range, High Pass, etc.) and the maximum number of linked speakers. It is important not to exceed the maximum number of elements per channel to avoid damage to the amplifier and speakers.
7. Check if the preset has any Manufacturer EQs (MEQs). MEQs are equalizations designed to compensate for specific behaviors or configurations. The guide will indicate whether the preset has MEQs and which category they belong to (A or B).
8. Take note of the preset's HPF/LPF (High Pass Filter/Low Pass Filter) cut-off frequency. This information is provided for top loudspeakers and subwoofers.
9. Load the preset by selecting it and clicking on the "Load" or similar button in ArmoníaPlus. The preset will be applied to your GTA series amplifier.
10. Adjust other settings as needed, such as delay, gain, and equalization configurations. The preset layout section in the manual provides explanations and guidelines for these settings.
11. Once you have loaded and customized the preset to your requirements, you can start using your GTA Series Innovative Power Supply with the optimized settings for your loudspeaker model.
Remember to refer to the manual for any specific instructions or details related to your GTA Series Innovative Power Supply and loudspeaker model. If you encounter any difficulties or have further questions, you can contact Outline directly through the provided contact information in the manual.
Add New Comment