User Manual Q&AAnswer
Mar 26, 2025 - 10:15 AM
To attach the phone mount to your car's dashboard, follow these steps:
1. Clean the surface of your car's dashboard where you intend to place the phone mount. Ensure it is free from dust, dirt, or any other debris.
2. Locate a suitable spot on the dashboard where you want to attach the phone mount. It should be within your reach and provide a clear view of the phone while driving.
3. Press the suction cup firmly onto the chosen spot on the dashboard. Make sure the surface is smooth and flat for better adhesion.
4. Once the suction cup is in place, push the bottom switch downward to secure it. This creates a vacuum seal and ensures the mount stays firmly attached.
5. Adjust the angle of the arm by loosening the side wheel. Rotate the arm to the desired position and tighten the wheel to secure it.
6. If needed, extend or retract the length of the arm by loosening the back wheel and adjusting it to the desired length. Tighten the wheel to lock the arm in place.
7. Attach the phone mount to the ball joint on the arm. Align the mount with the ball joint and tighten the wheel on the back to secure it.
8. To open the phone mount, press and hold the button located on the right side of the mount. This will release the grip and allow you to place your phone.
9. Carefully place your phone into the mount, ensuring it rests on the two bottom supports. Press the side supports inward to secure the phone firmly in place.
Remember to always follow local laws and regulations regarding the use of phone mounts while driving.
Add New Comment