Answer

Mar 26, 2025 - 09:19 AM
To connect the hydraulic hoses to the STANLEY TP0813 Hydraulic Trash Pump, follow these steps:
1. Start by wiping all hose couplers with a clean lint-free cloth before making connections.
2. Connect the hoses from the hydraulic power source to the couplers on the trash pump or trash pump hoses. Connect the return hose first and disconnect it last to minimize or avoid trapped pressure within the trash pump motor.
3. Observe the arrow on the couplers to ensure that the flow is in the proper direction. The female coupler on the trash pump is the inlet (pressure) coupler.
It is important to note that the hydraulic circuit control valve must be in the "OFF" position when coupling or uncoupling the tool. Wipe all couplers clean before connecting to avoid damage to the quick couplers and overheating of the hydraulic system.
Add New Comment