Answer

Mar 26, 2025 - 09:07 AM
To start the DJI D12000iE Multifunctional Inverter Generator, follow these steps:
1. Make sure the engine has been filled with engine oil and the fuel tank has at least 1L of fuel.
2. Connect the charging cable to an Intelligent Flight Battery that is powered off.
3. Press and then press and hold the power button on the battery to power it on.
4. Move the engine switch to the Start position and hold it for at least 3 seconds, then release. The engine switch will return to the ON position and the generator will start automatically.
5. The generator will start charging the battery. Each of the four LEDs on the battery will blink successively during charging. Remove the battery when the four LEDs turn solid or off and connect another battery to charge.
Note: The generator automatically attempts to start a maximum of three times every time the engine switch is moved to the Start position. If the generator fails to start after three automatic attempts or stops right after starting, connect it to the remote controller to see more information regarding the malfunction.
Please refer to the DJI D12000iE Multifunctional Inverter Generator User Guide for more detailed instructions and safety precautions.
Add New Comment