User Manual Q&AAnswer
Mar 26, 2025 - 08:36 AM
To install the batteries in the emist EX7000 Electrostatic Disinfectant Sprayer, follow these steps:
1. Charge the battery first by plugging the charger cord into a wall outlet and installing the battery into the charger. The power indicator on the battery will show the charge level (3 bars = full charge).
2. With the power pack battery ports located toward the bottom of each side, insert the battery into one port. Make sure the battery release button is facing up and gently push the battery into the port until it clicks into place.
3. Depress the trigger on the applicator to verify that the power is on. The red indicator light on the back of the handle will turn red, indicating that the system is engaged.
4. The emist EX7000 can accommodate two batteries for longer run time, but only one battery is required to operate the system.
Please refer to the emist EX7000 Electrostatic Disinfectant Sprayer User Manual for more detailed instructions and safety precautions.
Add New Comment