How do I install the TaiMei MD04 Bathroom Vanity Mirror? (TaiMei Bathroom Vanity Mirror User Guide)

Answer

manuals.plus

Mar 26, 2025 - 08:33 AM


To install the TaiMei MD04 Bathroom Vanity Mirror, you can follow either of the two methods provided in the user guide.

First Way:
1. Select the desired position of the mirror and mark the location.
2. Mark the drilling locations and ensure they are leveled.
3. Using a drill, make holes and fill them with the supplied plugs. Then, install the mounting bracket.
4. Connect the electrical wiring according to the diagram provided. It is recommended to seek the help of a licensed professional electrician if you are unsure about the wiring.
5. Place the mirror against the wall and slide it down.

Second Way:
1. Select the desired position of the mirror and mark the location.
2. Measure the center of the holes and mark the drilling locations, ensuring they are leveled.
3. Using a drill, make holes and fill them with the supplied plugs and screws. Leave a gap of 2-3mm between the  xxxx  head and the wall.
4. Connect the electrical wiring according to the diagram provided. Again, it is recommended to seek the help of a licensed professional electrician if you are unsure about the wiring.
5. Place the mirror against the wall and slide it down.

Please note that the colors referenced in the electrical wiring diagram are based on conventional standards and may differ between households. It is important to follow the correct wiring instructions to avoid any risks of electric shock, fire hazard, or other potential dangers.