Answer

Mar 26, 2025 - 08:08 AM
To set the DMX address for the qtx MHS-100G, follow these steps:
1. Press the "MENU" button on the rear panel of the unit to enter the settings menu.
2. Use the "UP" and "DOWN" buttons to navigate through the various setting functions.
3. Look for the "Addr" function in the menu and select it.
4. Use the "UP" and "DOWN" buttons to set the desired DMX address. The range is from A001 to A512.
5. Press the "ENTER" button to confirm the setting.
Once you have set the DMX address, the unit will receive DMX signals from the controller using that address. Make sure to connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. You can also loop through the DMX out on the unit to control additional fixtures with the same DMX signal.
Please refer to the user manual for more information and detailed instructions on setting up and using the qtx MHS-100G 100W Spot Wash LED Moving Head.
Add New Comment