User Manual Q&AAnswer
Mar 26, 2025 - 08:07 AM
To connect the VISION SP-1800 Pair 3-Way Wall Loudspeakers to your amplifier, follow these steps:
1. Terminate Cables to Loudspeakers: Connect the speaker cables from your amplifier to the xxxx terminals on the rear of the loudspeakers. Use unshielded speaker cable with a gauge of 0.75mm or higher.
2. Tighten Bracket Screws: Set the desired angle for the loudspeakers and lock off the side screws to secure them in place.
Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment